Introduction
The KE3600 Multi Tester is a hand-held device suitable for field testing of xDSL, Ethernet, ISDN, Copper, Triple
Play, SHDSL, Bonding and GPON. You have purchased a simple and intuitive solution for line pre-
qualification, commissioning and troubleshooting. In order to use the KE3600 often and successfully as
possible, please read this manual carefully.
The device was manufactured according to the following guidelines:
73/23/EEC
DIN VDE 0800
DIN EN 61010
DIN EN 41003
DIN IEC 60068-2-1, 60068-2-2, 60068-2-3, 60068-2-14, 60068-2-27, 60068-2-6-fc, 60068-2-78,
60068-2-29
Should you have additional questions regarding operation and usage of this device, please contact:
Kurth Electronic GmbH
Access Network Testing
Mühleweg 11
72800 Eningen u.A.
GERMANY
Tel: +49-7121-9755-0
Fax: +49-7121-9755-56
E-mail: [email protected]
www.kurthelectronic.de
Kurth Electronic is ISO9001 certified and WEEE registered.
Down
IPTV
BIN
Uhrzeit / Datum
Showtime
Showtime
4
Safety Instructions
The KE3600 may only be operated with the accessories originally provided. Using the device with
accessories that are not original or for applications for which it was not intended can lead to incorrect
measurements and may damage the device. The relevant safety regulations in VDE 0100, 0800 and
0805 must be observed.
n
The use of circuit points other than intended can damage the device. The device should not
be used with high-voltage current. Kurth Electronic assumes no liability for damage resulting from
improper use.
n
Never apply external voltage to the device.
n
Open the device only to change the batteries. Compare instructions on page 20. There are no other
parts in the device that need to be serviced or calibrated.
n
The measuring device is protected from splashing water and dust by the front film covering.
However, it is not water-tight.
n
Never pull unnecessarily on the cables connected to the device.
Operating Manual
KE3600
xDSL
M
ULTI
T
EST
3
KURTH ELECTRONIC www.kurthelectronic.de [email protected]
