Help
Date / Time
Receive Level
Frequency 9,99 kHz
a/b: 0,0 V
133
116
98,1
5,00 kHz
Receive Power -106,3 dBm
dB
8,33 kHz
11,7 kHz
15,0 kHz
100
W
Impedan.
auto
Min
auto
Max
Operating Manual
KE3600
xDSL
M
ULTI
T
EST
Measurement method
Select the mode NEXT Measurement and press SEL. The
signal can be transmitted with different impedance values,
these can be selected under F2 Impedance. Min, the lower
value and with Max the upper value of the graphic are pre-
defined.
Connect the primary pair only to line 1 (Tx). Connect the
second pair to be tested on line 2 (Rx).
Measurement results
The measurement results are available both graphically and
numerically and are displayed simultaneously. Indicated is the
frequency in Hz and crosstalk in dB.
Receive Level
In this mode the KECT3 can be used as a selective level meter
in conjunction with
Transmit Signal
. The measuring range is
adjusted as described in
Settings
.
Measurement method
Select the mode Receive Level and press SEL. The signal can
be transmitted with different impedance values, these can be
selected under F2 Impedance. Min, the lower value and with
Max the upper value of the graphic are pre-defined
Measurement results
The measurement results are available both graphically and
numerically and are displayed simultaneously. Indicated is the
frequency in Hz and the receive power in dBm.
Transmit Signal
In this mode KECT3 generates signals for the Attenuation
measurement. Further details of the Attenuation measure-
ment, see in
Attenuation.
Settings
Select the operating mode Transmit Signal and press SEL.
Up in the display the specification of the used copper
parameter is shown. The signal can be transmitted with
different impedances, these are selectable under F2
Impedance.
Under F3 Power, the transmission power can be increased in
increments of 1 dBm or reduced.
Under F4 Frequency the start frequency as a function of the
selected DSL version (shown in section 3.1) can still be
customized.
31
KURTH ELECTRONIC www.kurthelectronic.de [email protected]
Date / Time
Transmit Signal
a/b: 0,0 V
250 kHz
0 dBm
Frequency
Transmitpower
Help
100
W
Impedan.
Power
Frequen.