Küppersbusch KD 674.1 GE, Инструкция по использованию и монтажу

Страница: 22 / 68

Part 1 - INSTALLATION INSTRUCTIONS
4.4 - Ducting or recirculation fitting
1 - Ducting fitting.
This is possible for all forms of installation:
a) Connect the air outlet to the external ducting system.
b) Remove the activated charcoal filter (if there is one) inside the
hood canopy (see Maintenance).
2 - Recirculation fitting
This is only possible with the air outlet directed upwards. Fit the
venting grille
G onto the air outlet ( Fig. 25 ). The activated charcoal
filter should be fitted inside the hood canopy after connection to
the power supply.
4.5 - Connection to power supply and checking
of good working order
1 - It is absolutely necessary to follow
the warnings 3.2, 3.3 and 3.4 of
paragraph 3, concerning safety
measures.
2 - Loosen the two locking screws and
remove the metal cover ( fig.26 ).
Connect the hood connection to the
engine connection (
fig.27a ).
Correctly place the connectors
under the cover and tighten the two
locking screws (
fig. 27b ).
3 - Once electrical connection has
been carried out, check that lights,
engine and change of speed work
4 - Fit the antigrease filters (paragraph
4.2) and the activated carbon filter
(only for filter mode) (see
Maintenance).
2 5
2 5
A08_26
2 6
2 6
27b
A08_27
27a
2 7
2 7