Küppersbusch KD 674.1 GE, Инструкция по использованию и монтажу

Страница: 19 / 68

19
Part 1 - INSTALLATION INSTRUCTIONS
3 - Fitting the hood canopy C to the wall
a) Remove the metal grease filters and the
activated charcoal filter, if there is any (see
the paragraph on Maintenance).
b) Fit the support rod B using the two screws
K (3,5x9,5) provided ( fig. 8 ).
c) Hook the hood canopy C to the eye bolts
O fixed in holes 1 ( fig. 9 ).
d) Adjust the support rod B so that it pushes
against the wall ( fig. 10 ).
e) Adjusting position ( fig. 11 ). There are two adjustable hooks at the rear of the hood,
which can be used to adjust its position as follows:
- Turn the screws L until the position of screws N coincides with the lower access
holes.
- Turn the screws N to adjust the vertical and horizontal position of the hood.
- Lock the screws L to fasten the hood against the wall.
- Insert the plugs T provided in the holes giving access to screws N .
8
8
9
9
1 1
1 1
B
A08_10
1 0
1 0