The height of the cooker hood can be adjusted with the mounting angles. You can
use sheet metal hooks on the body of the hood to hang up the hood before you
finally mount it.
Once you have mounted the body of the hood onto the mounting angles, fasten the
LED glass panels that have been supplied as shown in Fig. 7.5 and 7.6. When doing
so, place the metal rims of the LED glass panels into the slits of the cooker hood,
making sure that you first of all insert the cable through the hole in the body of the
hood and then push the screw threads protruding from the metal rims of the LED
glass panels in the two holes on each side. Now take the butterfly screws that have
been supplied and fasten the LED glass panels to the respective two screw threads.
Fasten the metal rims of the LED glass panels onto the underside of the cooker hood
with two screws each. Now insert the two plugs of the LED glass panels into the
plugs in the cooker hood sockets (Fig. 7.7 / 7.8) and use the available cable
fastenings on the cable to fasten them to the outer wall of the cooker hood in the
interior by pulling the band off and pressing them onto the wall of the cooker hood.
Fig. 7.5
Fig. 7.6
Fig. 7.7
Fig. 7.8
36
Содержание IKD9980.0BGE
Страница 2: ......