To mount the chimney take the assembly clamp that has been provided (Fig. 5),
place it at the required height, generally right below the ceiling (Fig. 5) and then
fasten it. You will then need to make the connection for the extraction air and mount
the chimneys according to Fig. 5 and Fig. 5.1.
For the recirculation mode you will first of all need to follow the instructions given in
Fig. 5.2 before you mount the chimneys, also according to Fig. 5 and Fig. 5.1.
Please note:
Exctraction mode
:
Telescopic part of the chimney with recirculation air
openings
facing down
Recirculation mode
:
Telescopic part of the chimney with recirculation air
openings
facing up
Pull the telescopic chimney (B) upwards and fasten it to the assembly clamp (C) with
the screws (do not use a battery-operated screw driver!).
Fig. 5
Fig. 5.1
Fig. 5.2
33
Содержание IKD9980.0BGE
Страница 2: ......