Kuppersbusch KI8120.0SR, Инструкция по использованию и установке

Страница: 30 / 68

30
Examples of cooking power setting
(the values below are indicative)
1 to 2 Melting
Reheating Sauces, butter, chocolate, gelatine
Dishes prepared beforehand
2 to 3 Simmering
Defrosting Rice, pudding, sugar syrup
Dried vegetables, fish, frozen products
3 to 4 Steam Vegetables, fish, meat
4 to 5 Water Steamed potatoes, soups, pasta,
fresh vegetables
6 to 7 Medium cooking
Simmering Meat, lever, eggs, sausages
Goulash, roulade, tripe
7 to 8 Cooking Potatoes, fritters, wafers
9 Frying, roosting, boiling water Steaks, omelettes, fried dishes, water
P Frying, roosting
Boiling water scallops, steaks
Boiling significant quantities of water
MAINTENANCE AND CLEANING
Switch-off the appliance before cleaning.
Do not clean the hob if the glass is too hot because they are risk of burn.
•
Remove light marks with a damp cloth with washing up liquid diluted in a little water. Then rinse with
cold water and dry the surface thoroughly.
•
Highly corrosive or abrasive detergents and cleaning equipment likely to cause scratches must be
absolutely avoided.
•
Do not ever use any steam-driven or pressure appliance.
•
Do not use any object that may scratch the ceramic glass.
•
Ensure that the pan is dry and clean. Ensure that there are no grains of dust on your ceramic hob or
on the pan. Sliding rough saucepans will scratch the surface.
•
Spillages of sugar, jam, jelly, etc. must be removed immediately. You will thus prevent the surface
being damaged.
WHAT TO DO IN CASE OF A PROBLEM
The hob or the cooking zone doesn’t start-up :
•
The hob is badly connected on the electrical network.
•
The protection fuse cut-off.
•
The locking function is activated.
•
The sensitive keys are covered with grease or water.
•
An object is put on a key.
The control panel displays [ U ] :
•
There is no pan on the cooking zone.
•
The pan is not compatible with induction.
•
The bottom diameter of the pan is too small.
Continuous ventilation after cutting off the hob :
•
This is not a failure, the fan continuous to protect the electronic device.
•
The fan cooling stops automatically.