Kuppersbusch KD 3700.0, Руководство по обслуживанию

Страница: 14 / 18

14 Service Manual
For internal use only
9. Removing the electrical components
The hood must be disconnected from the mains power supply before it is cleaned or
before any maintenance work is carried out.
The electric components are mounted on a metal plate which is located on the inside of the hood.
1. Remove the connections of the two lamps (Fig. 2).
2. Press the two clips on the side and take out the
lamp block (Fig. 3).
3. Remove the metal frame after the four screws (A)
have been removed (Fig. 4).
4. Loosen the two knurled screws (B) but do not
remove them (Fig. 5).
5. Take out the control element block (Fig. 6).
6. Take off the bottom decorative pipe after the four
screws (C) have been removed (Fig. 7) and pull it
out downwards.
7. Take out the top decorative pipe after the two
screws (D) have been removed and pull it out
downwards.
8. The metal plate on which the electrical components
are mounted will now be exposed.
Fig. 7
Fig. 8
Fig. 9