Kuppersbusch KD 3700.0, Руководство по обслуживанию

Страница: 13 / 18

Service Manual 13
For internal use only
8. Accessing the connection box
The hood must be disconnected from the mains power supply before it is cleaned or
before any maintenance work is carried out.
1. Remove the connections of the two lamps.
2. Press the two clips on the side and take out the
lamp block.
3. Remove the metal frame after the four screws (A)
have been removed.
4. Loosen the two knurled screws (B) but do not
remove them.
5. Remove the control element block.
Fig. 4
Fig. 5
Fig. 6