Kuppersbusch IKD 1157.1, Руководство пользователя

Страница: 12 / 17

12 H5-60-53-01
For internal use only
9.5 Demounting the motor and the fan wheel of the IKD 1157.1
In order to demount the motor, the lower chimney must be pushed upwards, subsequently ensuring that
it does not slip down (risk of injury). Loosen the 8 screws of the front plate and then remove the grease
filters. Now loosen the two screws at the front and remove the front plate. After removing the front plate,
loosen the 4 screws (2 on the left and 2 on the right) of the support.
Then remove the support plate for the motor with the mains supply box, the electronics unit and the
halogen transformer by means of tilting it to the side. Loosen the 4 screws and remove the motor from
the support plate. Finally remove the 6 screws of the motor casing in order to be able to replace the motor
or the fan wheel.
The installation procedure is carried out in reverse.