Kuppersbusch IKD 1157.1, Руководство пользователя

Страница: 11 / 17

H5-60-53-01 11
For internal use only
9.4 Demounting the motor and the fan wheel from the KD 957.1
In order to demount the motor (KD 957.1) the hood should be taken off the wall. To do so, remove the
upper chimney and the lower chimney, take out the grease filters and remove both of the safety screws
on the back wall of the hood body inside the suction shaft. Remove the extraction hose on the motor
support and pull out the non-return valve. Then loosen the screws on the mounting brackets, gently
press the hood upwards, remove it from the wall mounting support and pull it out towards the front. Place
the hood on its back on a scrape-resistant surface. Remove the switch unit as indicated in 9.2, remove
the halogen lamps completely as described in 9.1. Loosen the screws (1) and then pull out the mounting
plate with the motor and the cables (switch and halogen lamps) upwards. Now loosen the screws (2) and
remove the motor with its casing from the mounting plate. Remove the screws from the motor casing.
The screw on the fan wheel can then be removed and the motor or the fan wheel can be replaced.
The installation procedure is carried out in reverse.
Mains
Electronics
Transformer