Kuppersbusch EKWE 320, Руководство по обслуживанию

Страница: 6 / 11

6 H1-58-01-04
Only for internal use
1.4 Electrical connection
The electrical connection must be carried out by a qualified electrician who is authorized to carry out
such work.
Both legal wiring regulations and the requirements of the local electric power supplier must be fully
complied with.
When connecting the appliance, a device must be provided which enables all-pole disconnection of the
appliance from the supply with a gap construction of at least 3 mm. For this a line protection, fuse and
contactor can be used.
When connecting and repairing the appliance disconnect it from the electricity supply.
Overall protection against electric shock must be ensured by the installation.
The earthed conductor lead must be sufficiently long so that, in the event of failure of the strain relief, it
is not subjected to strain until after the live wires of the connection cable. Any superfluous cable must be
removed from the installation area beneath the appliance. During installation the honeycomb control unit
must be dead.
Only honeycomb cooking zones may be connected to the honeycomb control unit EKWE 320. Otherwise
a dangerous situation may occur. The appliance has to be connected following the attached connection
plan.
The power connection cable must be replaced.
The pot recognition connection does not take place.
Electrical connection
mains cable
data line
power connection
honeycomb cooking zone honeycomb control unit
pot recognition connection
Leistungsmodul