Kuppersbusch EKWE 320, Руководство по обслуживанию

Страница: 5 / 11

H1-58-01-04 5
Only for internal use
1.3 How to proceed
In case of repairs replace the ceramic honeycomb as follows:
Disconnect the appliance from the mains!
Hold ready the replacement parts
new honeycomb control unit and power module
091581 Adhesive cleaner
535885 PACTAN Primer
091580 PACTAN Adhesive
162712 Connection cable
Undo and remove the casing cover with the power module and the control board from the casing.
Carefully cut the silicone seam between glass and worktop with a knife.
Usually honeycomb and casing can be separated from the worktop by exerting gentle but constant
pressure from below.
With wood or chipboard worktops, keep the amount of wooden fragments removed to an absolute
minimum!
In case of fitting the unit into a wooden surface, make sure to apply Primer to this surface beforehand.
see:
Repair instruction ESW 308.6
Chapter 8 Replacement description