Kuppersbusch EKWE 320, Руководство по обслуживанию

Страница: 4 / 11

4 H1-58-01-04
Only for internal use
1. Replacing the honeycomb control unit ESW 308.6 by
the EKWE 320
1.1 Defect of the honeycomb control unit
The new honeycomb control unit including the power module can replace any old honeycomb control
unit.
The new honeycomb control units are not larger than the older ones, but a power module will be added
to the new, very flat honeycomb control unit.
Please note: honeycomb control unit horizontal or honeycomb control unit pointed.
The number of the honeycomb control unit is no longer necessary!
1.2 Replacement
Completely remove the old control unit.
see:
Service Manual H1-58-01-02-Ä
Repair instruction ESW 308.6
Chapter 8 Replacement description
The plugs of the old heating honeycombs do not fit into the sockets of the new power module.
The existing connection is too short and should not be extended.
The connection must be replaced by a new connection cable.
Product number 162712
alternatively:
The plug can be replaced if the connection cable is long enough.
It is recommended to deactivate the pot recognition by entering the code.
When replacing change the pre-set code 88 in 66 .
or see Selection of the programme function p. 10 or
User Manual EKWE 320