Kummert easyTab, Инструкция по эксплуатации

Страница: 63 / 68

63
EN EN
63
Start and pause inspection manually
Tap on the gray dot (1) to start re-
cording. The dot is red as long as the
recording is running.
Tap on the
red dot (2) to pause the
recording. The dot is yellow as long as
the recording is paused.
Tap on the yellow
dot (3) to continue
recording.
1 2 3
Auto-pause
If there is no activity for 10 seconds,
recording pauses. This is indicated by
the yellow dot (1) . The recording starts
automatically when e.g. the reel is
moved.
1
Set marker (can3D
®
project)
Tap on Marking (1) .
An empty observation is created, which
can then be evaluated in can3D
®
.
1
End inspection
Tap on End of pipe (1) . A message will
appear indicating that it is not possible to
resume recording later.
Confirm with
OK (2) .
1
2
END OF OPERATION
Shut down the device via the software (see Software, Main menu).