Kuka Nebbiolo NFN 300 Series fogNode, Руководство по подключению

Страница: 20 / 22

Back to TOC
KUKA Connect Connectivity Guide
20 Issued: 9.10.2018 Version: 3.2
Figure 8. The LAN Configuration screen in the fogNode portal.
3. Change the Time Server name or its IPV4 address to the appropriate value if your network
cannot connect to the default time server.
4. Enter the DNS Server IPV4 address in the DNS Server field.
Note: When a static IPV4 address is configured, the DNS Server field cannot be blank. If you do
not have a DNS server IPV4 address ,configure the address with the default 8.8.8.8.
5. In the Admin VM section, select Use Static .
6. Enter the IPV4 address you selected during pre-deployment planning in the IPV4 Address field.
Note: Use an unassigned IP address within your network.
7. Enter the IP netmask in the Subnet Mask field.
8. If needed, enter the IPV4 address in the Default Gateway field.
9. In the OT VM section, select Use Static .
10. Enter the IPV4 address you selected during pre-deployment planning in the IPV4 Address field.
Note: Use an unassigned IP address within your network.
11. Enter the IP netmask in the Subnet Mask field.
12. If needed, enter the IPV4 address in the Default Gateway field.
Note: When a static IPV4 address is configured, the DNS Server IPV4 address must also be
configured.
13. Click Save.
14. Reboot the system.