Kuka Nebbiolo NFN 300 Series fogNode, Руководство по подключению

Страница: 11 / 22

Back to TOC
KUKA Connect Connectivity Guide
11 Issued: 9.10.2018 Version: 3.2
Prerequisites
The following hardware and software requirements must be met before using KUKA Connect:
Table 3. The KUKA Connect hardware and software requirements.
Hardware Operating System Additional Software
KRC4 controller with KUKA
robot
KSS 8.3.20 or later
KUKA LBR iiwa robot with
Sunrise controller
Sunrise.OS 1.11 or later
*Complimentary KUKA
Sunrise.Connect Option
package
Nebbiolo NFN 300 Series
fogNode™ with fogLet(s)
fogOS
*As the technical contact, you received the KUKA Sunrise.Connect Option package link via email with
instructions.
Pre-deployment Planning
Pre-deployment planning must be completed before you receive and deploy your KUKA Connect
hardware. Executing planning beforehand ensures quick deployment once your fogNode arrives.
Pre-deployment planning consists of:
Reviewing the pre-deployment checklist
Reviewing the equipment list
Completing a robot connection plan
Selecting static IP addresses, if applicable
Whitelisting, if applicable
fogNode location planning
Completing cabling requirements