Kuka Nebbiolo NFN 300 Series fogNode, Руководство по подключению

Страница: 19 / 22

Back to TOC
KUKA Connect Connectivity Guide
19 Issued: 9.10.2018 Version: 3.2
8. Enter the proxy server IPV4 address in the Proxy Host field and the port in the Proxy Port field if
the WAN network requires a proxy server to reach the internet.
9. Select Use Static .
10. Enter the IPV4 address that you selected during pre-deployment planning in the IPV4 Address
field.
Note: Use an unassigned IP address within your network.
11. Enter the IP netmask in the Subnet Mask field.
12. Enter the IPV4 address in the Default Gateway field.
Note: When a static IPV4 address is configured, the DNS Server IPV4 address must also be
configured.
13. Click Save .
14. Click Dashboard . The WAN Connection Status field should display as Connected.
Note: If the connection is not successful, review the configuration steps as well as the
Deployment Troubleshooting section .
Figure 7. The fogNode portal Dashboard screen with a WAN Connection Status of Not Connected.
15. If this completes your entire configuration setup, reboot the system. Otherwise, configure the
LAN network next.
To configure the LAN network:
1. Click Configuration on the left side menu bar.
2. Click LAN Configuration . The LAN Configuration screen displays.