KUHN GA8121, Руководство оператора

Страница: 50 / 84

Gyrorake
48
GA8121
Instructions for work
KN202BGB F
Crosswise horizontality
with "3D" axle:
- Remove screws (1), nuts (2) and washers (3).
- Position wheel stub axles (4) in the required position.
- Install the 3 screws (1), nuts (2) and washers (3):
• Torque: 8.5 daN m (63 lbf ft).
- Repeat procedure on each wheel stub axle.
with bogie axle:
- Remove screws (1), nuts (2) and washers (3).
- Position wheel stub axles (4) in the required position.
- Install the 3 screws (1), nuts (2) and washers (3):
• Torque: 8.5 daN m (63 lbf ft).
- Repeat procedure on each wheel stub axle.
The wheel spindle adjustment enables
setting the rotor levelling with regards to the
ground.
The wheel spindle adjustment enables
setting the rotor levelling with regards to the
ground.
1
3
2
4
4
2
3
1