KUHN GA8121, Руководство оператора

Страница: 48 / 84

Gyrorake
46
GA8121
Instructions for work
KN202BGB F
2. Adjustments in working position
 Working width
From the transport position:
- Remove lynch pin (4).
- Pull on the lock handle (1).
- Position rod (2) in one of the adjustment plate
holes (3).
- Release lock handle.
- Reinstall lynch pin (4).
- Proceed the same way with the second rotor.
Before making any adjustment:
- Check that nobody is within the machine
pivoting area.
- If there is someone, make sure the
person moves away.
The working width (L1) is comprised between:
• 7.40 and 8.00 m (24’3’’ - 26’3’’) (approximately).
The working width determins the swath width
(L2) obtained:
• L2 = 1.40 m (4’7’’) for L1 = 7.40 m (24’3’’)
approximately
• L2 = 2.00 m (6’7’’) for L1 = 8.00 m (26’3’’)
approximately
Move rod (2) towards the outside of the machine
to increase the working width.
Move rod (2) towards the inside of the machine
to reduce the working width.
Adjust both sides to the same setting.
L2
L1
3
1
2
+
-
4