8. - Instructions for work
GA6501
45
KN255AGB F
Gyrorake
8.3
Machine use
The machine is designed to form a central windrow
adjustable in width.
- Place the machine in working position.
Before the machine engages the crop:
- Engage the tractor PTO and slowly increase the
speed up to 540 min
-1
.
Before working:
- Fold rotor guards.
- Keep all persons and animals away from
the machine danger zone.
The headstock is designed to turn at an angle
of maximum 70 degrees to the right of left.
To preserve the steering system, never
exceed this angle.
For tight turns (less than 90 degrees) and U-
turns, it is recommended to place the machine in
headland turn position.
