- 32 -
PARKING THE MACHINE
1°
THE CUTTING/CONDITIONING UNIT
MUST BE RAISED INTO ITS VERTI-
CAL POSITION SO THAT THE
COMPENSATING SPRING(S) ARE
RELEASED.
2° Take out pin (L) which links the stand (E) to the
suspension rod (F) (photo 36). Lower and lock the
stand (E) with pin (L) in its support (R) (photo 37).
3°
Release hydraulic pressure to lower cutting/
conditioning unit to the horizontal position
[cylinder (V) is fully extended].
4° With the hydraulic 3-point lift, lower the machine to
the ground and disconnect the top link and the
hydraulic hose.
Then disconnect lower links and the PTO shaft.
5° Place the PTO shaft (A) in its support (U)
(photo 37).
FOR YOUR SAFETY : ALWAYS PARK THE MACHINE WITH THE CUTTING CONDITIONING
UNIT IN THE HORIZONTAL POSITION.
