- 41 -
DISCS SUPPLIED THROUGH OUR
SPARE PARTS DEPARTMENT
COME WITH A 1 MM SPACER (PART
no. 568 071 00) (fig. 50 A)
ATTACHED TO THEM. WHEN
INSTALLING A NEW DISC CHECK
IF THE GAP BETWEEN THE
BLADES OR THEIR MOUNTING
BOLTS AND THE CUTTERBAR PRO-
TECTION SHIELDS IS AT LEAST 1
MM. IF THIS IS NOT THE CASE FIT
THE 1 MM SPACER BETWEEN THE
DISC AND ITS MOUNTING HUB FOR
INCREASED CLEARANCE (fig. 50
A).
Make sure cone lids (14 - 15) are properly secured in place (photos 51 and 51 A). Tightening torque of bolts (V) is
8 daNm (60 ft.lbs)
.
ROTOR CONDITIONING FLANGES
When replacing rotor conditioning fingers (16), make
sure fixing plates (17) are positioned correctly and
bolts (18) are tightened to
8.5 daNm
(60 ft.lbs)
(photo 52).
REGULARLY CKECK ALL NUTS AND BOLTS FOR CORRECT TIGHTNESS,
PARTICULARLY THOSE SECURING DISCS AND BLADES.
