KUHN EL92-180, Руководство оператора

Страница: 16 / 88

EL92-180/205/230
16
4. - Safety
KN007CGB_F
Power tiller
Stage 2:
- Couple the machine to the tractor.
- To measure:
Load on front axle (t1):
• T machine (transport position).
- To do:
- If the front axle load (t1) is below 20% of the
tractor tare (T), add ballast weights (M1) to
exceed the minimum load on the front axle.
Example:
• (T) =7500 kg (16535 lb).
The front axle load must be of minimum 1500 kg
(3300 lb). (20% of T).
• (t1) =700 kg (1545 lb).
• 700 kg (1545 lb) < 1500 kg (3300 lb).
- Add ballast weights until the minimum front axle
load is exceeded.
- Repeat checking procedure.
Stage 3:
- To measure:
Total weight (t):
• T machine (transport position).
• Ballast weights.
Checking:
- To go to the next stage:
- Check in the tractor's operator's manual that the
value measured is below the tractor's Gross
Combined Weight Rating.
- To do:
- If t < PTAC go to the next stage.
- If the total unit weight exceeds the tractor Gross
Combined Weight Rating in accordance with the
countrie's legislation, empty the hopper to travel
on public roads.
- Repeat checking procedure.
Example:
• (t) =10000 kg (22046 lb).
• PTAC = 13000 kg (28660 lb).
- t < PTAC: Go to the next stage.
t1 = _____kg
t1 < 20% T t1 < 20% T
t1
t1 ≥ 20% T 20% T
t1 = ________ kg
kg kg
t = _____kg
t = ________ kg