KUHN EL92-180, Руководство оператора

Страница: 35 / 88

6. - Putting into service
EL92-180/205/230
35
KN007CGB_F
Power tiller

Categories of linkage
Models 180:
The lower coupling yokes can be placed in
2 different positions:
• Category 1 linkage:
L = 683 mm (2’2’’) (approximately).
• Category 2 linkage:
L = 825 mm (2’8’’) (approximately).

Adjusting the category
- Loosen screw (1).
- Unscrew the 2 nuts (3).
- Slide lower coupling yoke (4) to the required
position.
- Tighten the 2 nuts (3):
• Torque: 21 daNm (155 lbf ft).
- Adjust sliding guard (2) position to fully cover
machine front part between lower coupling yokes
and machine ends:
• Distance D between sliding guard and lower
coupling yokes must not exceed: 60 mm (2.4’’).
- Tighten screw (1):
• Torque: 8.5 daNm (63 lbf ft).
- Proceed the same way on the other side.
L
L
4
3
3
1
2
D