Contact
Kühling&Kühling or refer to
our web shop
for more detailed information on available and
applicable materials.
The HT500 is intended for industrial and commercial use. It is not valid for the operation in an
explosive atmosphere.
Observing this manual and adhering to the stated information is part of the proper operation.
Improper operation of the HT500 can lead to hazardous situations.
It is forbidden to operate the 3D Printer under conditions and for purposes other than stated in this
manual.
Operating the HT500 is forbidden under the following circumstances:
The HT500 is used for a purpose not designated.
The HT500 or single parts are damaged, the electrical equipment has been installed improperly,
or the isolation is defective.
The HT500 does not function flawless.
Mechanical components or the control system have been inexpertly altered or reconstructed.
Operating parameter have been altered inadmissibly.
Operation with unspecified materials.
Use of unspecified tools.
Failure to regularly perform the prescribed maintenance work.
Operation in an explosive atmosphere.
Warranty terms
The general
terms and conditions
of Kühling&Kühling GmbH apply. The customer is familiar with these
terms latest on the day of signing the purchase contract.
The warranty terms and the liability period can be found in the contract documents and in the order
confirmation.
Warranty claims and liability are voided in one or more of the following applies:
unintended usage of the HT500
false setup, commissioning, operation
repair or maintenance
operating the apparatus with defective,
missing, improperly installed and/or
malfunctioning equipment.
unauthorized or inadmissible alteration of
the electrical or mechanical equipment or
the operating parameters of the
apparatus.
use of other than the specified
replacement parts, tools, and/or operating
materials
INFO
Any unintended use or structural alteration
of the HT500 not agreed upon with and
approved in writing by Kühling&Kühling
render the warranty and the EU Declaration
of Conformity void and free
Kühling&Kühling from product liability. Even
if approved, alterations have to be carried
out by the customer thoroughly and
properly. If necessary, adequate safety
devices have to be installed.
