all-season ambient temperature between 15 and
25°C and a relative humidity of 70%.
Position the HT500 on a flat, carrying and
enduring surface with a load capacity of at least
75 kg.
To ensure unhindered aeration of the electronic
chamber no soft, movable materials (e.g. table
cloth, cardboard strips, paper etc.) may be
placed underneath the apparatus to prevent
clogging of the vent slots.
The required setup space must at least be 650 x
650mm and provide approximately 500mm free
space to either side to enable unhindered access
to the electronic chamber for service and
maintenance work. At least 750mm free space
must be left at the back of the HT500 to make
changing the material easy and to ensure free
air circulation at the ventilation grill in the back
cover. At the front a free space of 1.250mm is
recommended to allow easy operation with open
chamber doors.
To easily access the touchscreen in a sitting or
standing position the height of the setup table
should not undercut 780mm.
A 230V power source must be within the range
of the connection cable.
Necessary free space around the HT500.
Unpacking the machine
DANGER OF CUTTING INJURIES AND EYE DAMAGE!
The packing straps are pretensioned and may whip when cut, causing cutting injuries or eye
damage.
Hold down the top part of the strap and cut it at the side. Make sure it does not hit
somebodies face.
DANGER OF CUTTING INJURIES!
The transport box is made of unfinished plywood and may hold splinters and sharp edges that
can cause cutting injuries.
Take care when removing the transport packaging and wear protective gloves.
