KUHL Quantron E2, Оригинальное руководство пользователя

Страница: 49 / 108

Operation of the Quantron E2
43
4
4.5.4 Drop point
If the Quantron E2 is connected to a AXIS 50.1 W mineral fertiliser spreader, the
drop point is electrically confirmed and set.
1. Switch from the Fertiliser settings menu to the Drop point menu.
2. Determine the position for the drop point using the fertiliser chart.
3. Enter the determined value in the input field using the arrow keys :
Arrow up : Value increases.
Arrow down : Value decreases.
See also chapter 4.11.2: Input of values using the cursor keys, page 89
4. Press the enter key .
A message appears in the display asking for the new setting to be con-
firmed.
See chapter 5.1: Meaning of alarm messages, page 91
The fertiliser settings window appears with the new drop point on the display.
If the drop point is blocked, alarm 17 appears; see chapter 5.1: Meaning of alarm
messages, page 91 .
NOTICE
Entering the drop point for AXIS 20.1 W, AXIS 30.1 W or AXIS 40.1 W is mere-
ly informative and does not affect the settings of the fertiliser spreader.
n
CAUTION
Risk of injury due to automatic adjustment of the drop point!
On the AXIS 50.1 W the alarm move to drop point intervenes.
After pressing the start/stop key, the drop point is automatically
moved to the preset value using the electrical actuating cylinders.
This can cause injuries and material damage.
Before pressing the start/stop key, ensure that no one is in
the danger area of the machine.
NOTICE
Emergency actuation on the AXIS 50.1 W must not stop the adjustment of the
drop point. Otherwise the setting unit of the drop point can be damaged.