KUHL ALTOR 11050, Инструкция по эксплуатации

Страница: 32 / 46

32
OPTIONS
Beware!
- WHEN CLEARING A BLOCKAGE OR REPLACING A WORKING PART, WEAR PROTECTIVE
GLOVES AND ONLY USE APPROPRIATE TOOLS.
- To fit the options, you will need to use a variety of handling equipment and tools. Refer to the safety
instructions for such equipment before use.
- The machine must be unhitched from the tractor before assembling an option.
- Before assembling an optional device with the machine or one of the machine’s loading components
in the raised position, prop up the machine or the component with an appropriate support.
- If lifting gear (block and tackle, elevator, etc.) is used to handle the machine, only use the specially
provided lifting hooks shown by a pictogram.
The machines are designed to take the optional equipment shown in the table below.
The optional minerals hopper and weight indicator or programming unit are factory-mounted only.
Before fitting any optional item of equipment to a machine, observe these few rules:
- Check that the equipment received is what was actually ordered.
- Check the contents of the package against the list provided in the instructions.
- Carefully read the assembly and operating instructions for the equipment.
OPTIONS ALTOR 11050 TURBOMEL 11050
Mixer hopper
X X
Hopper electronic proportioning device
X X
Weight indicator or programming unit
X X
Free wheel transmission
with hopper
X X
without hopper
X X
Free wheel homokinetic transmission
with hopper
X X
without hopper
X X