29
Schutter
2) MIXING
(TURBOMEL 11050 only)
When loading, begin with fibrous products, then add the minerals and finally the silage.
Beware, the addition of fibrous products (straw, hay, etc.) leads to an increase in volume after recycling.
Set the turbine speed to 270 rpm.
Set the beater bar speed (high or low).
When mixing or distributing fibrous
products (long grass, hay, etc.), a more
regular product flow and improved fibre
cutting will be achieved at high beater
bar speed.
Put the shutter and cover into the
recycling position (this takes 3 to 4
seconds).
Engage the tractor PTO and bring the
engine up to nominal speed.
Set the beater bars in forward motion with the conveyor speed at 0. Gradually bring it up to between
3 and 4. (The optimum conveyor speed will depend on the available tractor power).
Should the beater bars jam, switch them and the conveyor into reverse in short bursts to free.
When mixing is complete, stop the beater bars and conveyor (set conveyor to 0), put the shutter and
cover into the distribution position then disengage the tractor PTO.
Содержание ALTOR 11050
