5
AFTER SALES SUPPORT
1300 886 649
AUS
MODEL: TK-1818R2A PRODUCT CODE:47365 10/2014
Warranty Details
General Safety Instructions
Read this manual thoroughly before first use, even if you are familiar with this
type of product. The safety precautions enclosed herein reduce the risk of fire,
electric shock and injury when correctly adhered to. Keep the manual in a safe
place for future reference, along with the completed warranty card, purchase
receipt and carton. If applicable, pass these instructions on to the next owner of
the appliance.
Always follow basic safety precautions and accident prevention measures when
using an electrical appliance, including the following:
Electrical safety and cord handling
• Voltage:
Make sure your outlet voltage and circuit frequency correspond to
the voltage stated on the appliance rating label.
• Wall outlet:
Only plug the appliance into a properly earthed electrical outlet.
• Do not immerse:
To protect against fire and electric shock, do not immerse
the cord, plug or the appliance itself in water or other liquid, or expose any of
the electrical connections to water.
• Protect the cord:
Do not kink, bend, squash or damage the power cord
and protect it from sharp edges and heat. Do not let it touch hot surfaces,
including the machine’s hot surfaces. Make sure the cord does not hang over
the edge of a table or benchtop and nothing is placed on top of the cord.
• No extension cord, no timer:
Do not use the appliance with an extension
cord. Do not use it with a timer or a separate remote control system.
• Damage:
Do not pick up or operate the appliance if the power supply cord,
plug or housing is damaged. Do not use the appliance after it malfunctions or
has been damaged in any manner. A damaged cord or plug must be replaced
by appropriately qualified personnel in order to avoid a hazard. In case of
damage, unplug the machine and contact our after sales support line for advice.
• Disconnect:
Unplug the espresso machine from the power supply:
• If anything unusual occurs during the brewing process.
• Before cleaning, servicing or moving the machine (allow it to cool before
cleaning).
• If you will not use it for an extended time (e.g. when going on holidays).
To disconnect, turn any control to the off position and unplug the machine
from the wall outlet. When unplugging, grab the plug, do not pull the cord.
• RCD:
Unless your home is already fitted with a residual current device (safety
switch), we recommend installing an RCD with a rated residual operating
current not exceeding 30mA to provide additional safety protection when
using electrical appliances. See your electrician for professional advice.
