Saeco Moltio
HD8768
AMF
Buttons and symbols:
Machine Settings
:
•
Memo setting, cup volume.
Espresso and Coffee button can be adjusted
and set to your preference.
1.
Place a cup under the dispensing spout.
2.
Press and hold the espresso/coffee button until the
“MEMO” icon is displayed. Then release the button.
3.
Press the espresso button when the desired amount
is reached. Also when adjusting the coffee button.
Aroma Setting:
Five strength choices are possible by pressing
the “Aroma" button.
= extra mild aroma
= mild aroma
= medium aroma
= strong aroma
= extra strong aroma
= pre-ground coffee
Product dimensions and information
•
Product dimensions (L x D x H): 256 x 470 x 350 mm
•
Coffee bean capacity: 290 gr
•
Waste container capacity: 15 servings
•
Water tank capacity: 1.9 l
•
Maximum cup height: 142 mm
•
Product weight: 8.5 kg
•
Grind settings:
The grinder can be set with the grinder
adjustment key. Remove first the bean
container.
1.
Coarse grind: lighter taste, for dark roasted
coffee blends
2.
Fine grind: bolder taste, for light roasted
coffee blends.
•
Water hardness setting:
The water hardness can be measured with
the supplied tester strip.
1.
Immerse the strip 1 sec. in water.
2.
Check how many squares have changed
to red and consult the table.
3.
The numbers on the strip correspond to the
water hardness adjustment settings.
4.
To set the hardness on the machine; Press
the Menu button until the hardness setting
appears and select the number.
Cleaning and Maintenance
:
•
Empty drip tray:
Empty and clean the drip tray each time
the ‘drip tray full’ indicator pops up through
the drip tray cover.
•
Empty Coffee ground container:
Always empty the container when the machine is
switched ON and when the empty symbol appears.
•
Descaling:
Descale the machine when the calc clean
symbol appears. Start the descaling and
follow the instructions on the display.
Only use the Saeco decalcifier CA6700. It takes approx. 35
min. Finish the complete descale process till the end without
interruption.
•
Brew group cleaning:
Support movies available within the FAQ’s;
how to lubricate/how to clean.
Clean
the brew group weekly. Take it out and wash it with
fresh, lukewarm water. Clean it monthly with the coffee oil
remover tablet CA6704.
Lubricate
the brew group once a month or if needed after
cleaning. Use Saeco grease HD5061.
•
Cleaning Automatic milk frother:
Daily:
Rinse for hygiene and to ensure perfect milk
froth
Weekly:
Detach all parts and clean thoroughly.
Monthly:
Clean with the Saeco Milk Circuit Cleaner CA6705.
•
Cleaning coffee duct outlet (coffee funnel):
Clean the coffee duct outlet every time you clean the brew
group. Take out the brew group and clean the coffee duct
outlet with a spoon handle.
•
Water pressure in pump: 15 bar
•
Supported coffee types: Ground
coffee and Whole coffee beans
•
Automatic Milk Frother
First time use:
Machine needs to be installed and primed.
1. Insert the drip tray.
2. Rinse and fill the water tank with fresh water up to the MAX level.
3. Pour coffee beans into the coffee bean hopper.
4. Insert the plug and switch the power button to “I”. (back of the machine).
5. To turn on the machine, press the “ON/OFF ” button on the front.
6. The display will indicate you have to prime the circuit.
7. Place a container under the steam wand.
8. Press the Espresso button to start the priming. After this he machine starts
heating up and performs an automatic rinse cycle trough the coffee spout.
9. Perform a manual rinse by dispensing some hot water wand and brew a pre-ground coffee
without adding coffee.
Display
