Kubota ZD1211-60, Руководство оператора

Страница: 48 / 106

3. Use the higher settings for mowing in a rough area
or when mowing tall grass. Lower settings must be
used only for smooth lawns where short grass is
desired.
(1) Cutting height control dial
(2) Hydraulic lift control pedal
4. Lower the mower deck by depressing the hydraulic
lift control pedal (DOWN). This lowers the mower
deck from the
“TRANSPORT” position to the
“OPERATING” position.
5. Adjust the anti-scalp rollers' height as
recommended below for normal operating
condition. To minimize gouging and roller damage
or wear, the anti-scalp rollers will maintain the
ground clearance of 19 mm (0.75 in.).
IMPORTANT :
• Never allow the rollers to contact the ground
continuously as premature roller wear may
develop if set incorrectly.
• Anti-scalp rollers must maintain a minimum
clearance of 6 mm (0.24 in.) to the ground.
Bolt setting
RCK60P
(1) Anti-scalp roller (front, swivel type)
(2) Anti-scalp roller (rear, bolt shift type)
RCK72P
(1) Anti-scalp roller (front, swivel type)
(2) Anti-scalp roller (rear, bolt shift type)
RCK60R, RCK72R
(1) Anti-scalp roller (front, swivel type)
(2) Anti-scalp roller (rear, bolt shift type)
(3) Gear box
ADJUSTING THE CUTTING HEIGHT OPERATING THE MOWER
ZD1211,ZD1221
45