Kubota ZD1211-60, Руководство оператора

Страница: 41 / 106

• Always use the seat belt when the ROPS is
installed.
• Do not use the seat belt if a foldable ROPS is
down or if there is no ROPS.
Adjust the seat belt for proper fit and connect to the
buckle. The seat belt is an auto-locking retractable
type.
(1) Seat belt
3. Hydraulic lift control pedal
The hydraulic lift control pedal is used to raise and
lower the implement used with the machine (mower).
To lower the implement, depress the hydraulic lift
control pedal (DOWN).
To raise it, depress the hydraulic lift control pedal (UP).
(1) Hydraulic lift control pedal
(UP)
(2) Hydraulic lift control pedal
(DOWN)
(A) “DEPRESS”
(B) “DOWN”
(C) “UP”
IMPORTANT :
• Do not operate until the engine is warmed up. If
operation is attempted when the engine is still
cold, the hydraulic system may be damaged.
• Do not operate at slow engine rpm. Move the
throttle lever above 1/2.
• If noises are heard when implement is lifting
after the hydraulic lift control pedal has been
activated, the hydraulic mechanism is not
adjusted properly. Contact your local KUBOTA
Dealer for adjustment.
• Do not depress the hydraulic lift control pedal.
When the engine is off, depressing the
hydraulic lift control pedal (UP or DOWN) will
lower the implement.
4. Throttle lever
• Move the throttle lever backward to decrease the
engine speed.
• Move it forward to increase the engine speed.
(1) Throttle lever (A) “INCREASE”
(B) “DECREASE”
5. Parking brake pedal
To apply the parking brake:
1. Depress the parking brake pedal firmly with your
right foot and the parking brake lock pedal
simultaneously with your left foot.
2. Then release the parking brake pedal while holding
the parking brake lock pedal down.
To release the parking brake:
Depress the parking brake pedal and release it slowly
with your right foot, without pressing the parking brake
lock pedal.
(1) Parking brake pedal
(2) Parking brake lock pedal (A) “DEPRESS”
OPERATING THE MACHINE STARTING THE MACHINE
38
ZD1211,ZD1221