Kubota Super Series 2 KX 91-3, Руководство оператора

Страница: 35 / 98

15 OPERATION OF THE ENGINE
STARTING THE ENGINE UNDER COLD
CONDITIONS
To avoid personal injury:
A
Make sure that the lock lever is in the lock
position during warm up.
Start the engine in the following manner;
1. Pull the lock levers all the way back (lock position).
2. Turn the starter switch to the position "RUN" (glow
position) and keep until the indicator lamp has gone
out.
3. Move the starter switch to the position "START"; to
crank and start engine.
4. Release the starter switch after the engine has started;
it will automatically return to the position "RUN ".
A
Let the engine warm up after start-up.
A
Let the engine warm up after start-up for approx. 10
minutes under no load conditions. If the hydraulic fluid
temperature is too low, the operations will be affected.
Do not operate the excavator under full load before the
engine has warmed up enough.
STOPPING THE ENGINE
To avoid personal injury or death:
A
Do not keep the bucket or dozer in the lifted
position, as a person could accidentally touch
the levers and cause serious accidents.
B
Emergency Engine Stop Knob
To avoid personal injury:
A
Pull the engine stop knob up and hold it until
the engine stops in case of emergency.
The engine stops when the key is turned off. If the engine
does not stop, pull the engine stop knob up and hold it
until the engine stops. After the engine has stopped, be
sure to push the engine stop knob back in, or the engine
will not start next time.
A
If the engine does not stop with the key, contact your
KUBOTA dealer.
1. After slowing the engine to idle, turn
the key to "STOP".
2. Remove the key.
(1) Emergency engine stop knob