Kubota Super Series 2 KX 91-3, Руководство оператора

Страница: 33 / 98

13 OPERATION OF THE ENGINE
To avoid personal injury:
A
If the fuel is poured too fast, the buzzer may not
sound according to the fueling process.
A
The moment when the fuel tank is nearly full,
the buzzer starts beeping.
A
Look into the fuel tank when pouring the fuel.
Listen to the buzzer sound for a rough estimate
of the fill-up progress.
C
Water Temperature Gauge
To avoid personal injury:
A Do not open the radiator cap during or just after
operation. Hot water may gush out and scald
you. Wait for the water to cool down before
opening the cap.
With the starter key at the " RUN " position, the cooling
water temperature is indicated. If the water temperature
indicator is near "
H ", take the steps below.
1. Discontinue the job.
2. Reduce engine rpm's to idle and keep it at idle for 5
minutes.
3. Stop the engine and check the following points (1)-(3).
(1) Low coolant level or leak
(2) Fan belt tension
(3) Mud or dust deposits on radiator
C Hour-meter
Indicates the total operating hours of the machine.
How the indicator works
A
The meter advances one hour after an hour of
operation regardless of the engine rpm.
C Engine tachometer
Indicates the current rpm of the engine.
A The LCD display may be illegible when viewed from a
certain angle. This is not a display failure.
B
LCD Display for Warning
C
Remaining fuel warning
When the fuel level is very low, the lamp (yellow) starts
flashing and the following message appears in the
display.
C
Battery charge warning
If the charging system fails, the lamp (red) starts
flashing and the following message appears in the
display.
(1) Water temperature gauge (A) "WATER TEMP LOW"
(B) "WATER TEMP HIGH"