Kubota Super Series 2 KX 91-3, Руководство оператора

Страница: 11 / 98

3 SAFE OPERATION
6. Keep all safety equipment and covers in place.
Replace damaged or missing safety devices.
7. Precautions against tipping over. Keep away from
steep slopes and embankments. Do not swing the
bucket downhill. Lower the dozer during digging. Keep
the bucket as low as possible while driving uphill. Turn
slowly on slopes (at reduced speed). Do not place the
excavator near the edges of trenches and banks, as
the earth can give away due to the weight of the
excavator.
8. Watch out at all times for the area to which the
excavator is being moved.
Pay attention to any hindrances.
C
Safety for children
Tragedy can occur if the operator is not alert to the
presence of children. Children generally are attracted to
machines and the work they do.
1. Never assume that children will remain where you last
saw them.
2. Keep children out of the work area and under the
watchful eye of another responsible adult.
3. Be alert and shut your machine down if children enter
the work area.
4. Never carry children on your machine. There is no safe
place for them to ride. They may fall off and be run
over or interfere with your control of the machine.
5. Never allow children to operate the machine even
under adult supervision.
6. Never allow children to play on the machine or on the
attachments.
7. Use extra caution when backing up. Look behind and
down to make sure the area clear before moving.
8. When parking your machine, if at all possible, park on
a firm, flat and level surface; if not, park across a slope.
Lower the bucket and dozer to the ground, remove the
key, place the control lock levers in the locked position
from the ignition and lock the cab door (if equipped),
before you leave.
Before leaving the machine,
A
Park the excavator on a firm, flat and level surface.
A Lower the attachments and the dozer blade to the
ground.
A
Stop the engine.
A
Release pressure trapped in the hydraulic system.
A Lock all control levers.
A
Remove the key.
3. AFTER OPERATION
(1) Lock lever for control lever (A) "Unlock"
(B) "Lock"