Kubota M105S, Руководство по ремонту

Страница: 123 / 561

1-S6
M105S, WSM ENGINE
W1013874
Item Factory Specification Allowable Limit
Intake Valve Timing Open 0.24 rad (14 °)
before T.D.C.
–
Close 0.61 rad (36 °)
after B.D.C.
–
Exhaust Valve Timing Open 0.785 rad (45 °)
before B.D.C.
–
Close 0.29 rad (17 °)
after T.D.C.
–
Valve Spring Intake 35.1 to 35.6 mm
1.3819 to 1.4016 in.
34.6 mm
1.3622 in.
Exhaust 35.1 to 35.6 mm
1.3819 to 1.4016 in.
34.6 mm
1.3622 in.
Setting Load / Setting Length Intake 63.547 N / 31.5 mm
6.48 kgf / 31.5 mm
14.256 lbs / 1.2401 in.
45.864 N / 31.5 mm
4.68 kgf / 31.5 mm
10.296 lbs / 1.2401
in.
Exhaust 63.547 N / 31.5 mm
6.48 kgf / 31.5 mm
14.256 lbs / 1.2401 in.
45.864 N / 31.5 mm
4.68 kgf / 31.5 mm
10.296 lbs / 1.2401
in.
Tilt (Valve Spring) – 1.0 mm
0.039 in.
Rocker Arm Shaft to Rocker Arm Oil Clearance 0.016 to 0.045 mm
0.00063 to 0.00177 in.
0.15 mm
0.0059 in.
Rocker Arm Shaft
O.D. 15.973 to 15.984 mm
0.6289 to 0.6293 in.
–
Rocker Arm I.D. for
Shaft 16.000 to 16.018 mm
0.6299 to 0.6306 in.
–
Valve Arm Bridge and Valve Arm Bridge
Shaft Clearance 0.018 to 0.042 mm
0.0007 to 0.0017 in.
0.15 mm
0.0059 in.
Valve Arm Bridge
(I.D.) 9.050 to 9.065 mm
0.3563 to 0.3569 in.
–
Valve Arm Bridge
Shaft
(O.D.) 9.023 to 9.032 mm
0.3552 to 0.3556 in.
–
Push Rod Alignment – 0.25 mm
0.0098 in.
Tappet to Tappet Guide Clearance 0.020 to 0.062 mm
0.0008 to 0.0024 in.
0.07 mm
0.0028 in.
Tappet Guide Bore
(I.D.) 24.000 to 24.021 mm
0.9449 to 0.9457 in.
–
Tappet
(O.D.) 23.959 to 23.980 mm
0.9433 to 0.9441 in.
–
Camshaft Side Clearance 0.07 to 0.22 mm
0.0028 to 0.0087 in.
0.3 mm
0.0118 in.
Alignment – 0.01 mm
0.0004 in.
KiSC issued 03, 2007 A