3-S30
M105S, WSM
TRANSMISSION
(7) Disassembling PTO Gear Case
Rear Cover Assembly
1. Remove the rear cover and PTO drive shaft as a unit.
(When reassembling)
W1033916
Disassembling PTO Gear Case
1. Remove the PTO case cover mounting screws and then remove
the PTO gear case cover (6).
2. Remove the stake of the staking nut (8), and then remove it.
3. Remove the bearing (7) by using the bearing puller.
4. Tap out the PTO shaft to the rear side.
5. Remove the gears (11), (14), the thrust collars (9), (17), the inner
rings (10), (15), the hub (13) and the shifter (12).
6. Pull out the PTO drive shaft (1) as a unit.
7. Remove the PTO shift fork parts and PTO shift lever parts.
(When reassembling)
• Reinstall the reamer screw at correct position to mount the PTO
cover case.
• Direct the grooves of the thrust collars (9), (17) to the inner rings
(10), (15) sides.
• Replace the PTO shaft staking nut (8) with new one, and stake it
firmly after tightening.
• Apply molybdenum disulfide (Three Bond 1901 or equivalent) to
the inner rings (10) and (15).
• Apply grease to the oil seal (19) and O-ring.
W1034001
Tightening torque
Rear cover mounting
screw
77.5 to 90.1 N·m
7.9 to 9.2 kgf·m
57.2 to 66.5 ft-lbs
Tightening torque
PTO shaft staking nut
225.6 to 264.8 N·m
23 to 27 kgf·m
166.4 to 195.3 ft-lbs
PTO gear case cover
mounting screws and
reamer screw
77.5 to 90.2 N·m
7.9 to 9.2 kgf·m
57.1 to 66.5 ft-lbs
(1) PTO Drive Shaft
(2) Ball Bearing
(3) Gear
(4) Gear
(5) Ball Bearing
(6) PTO Gear Case Cover
(7) Ball Bearing
(8) Stake Nut
(9) Thrust Collar
(10) Inner Ring
(11) Gear
(12) Shifter
(13) Hub
(14) Gear
(15) Inner Ring
(16) Internal Snap Ring
(17) Thrust Collar
(18) Ball Bearing
(19) Oil Seal
(20) PTO Shaft
KiSC issued 03, 2007 A
Содержание M105S
