15
Section 3: Operating Procedures
AP-SRT62, & AP-SRT76 Rotary Tillers 321-095MK
7/31/17
Pre-Start Checklist
Hazard control and accident prevention are dependent
on the awareness, concern, prudence, and proper
training involved in the operation, transport, storage, and
maintenance of the Rotary Tiller. Therefore, it is essential
that no one operates the Rotary Tiller without first having
read, fully understood, and become totally familiar with
the Operator’s Manual. Make sure operator has
completed the Operating Checklist below.
General Safety Information
!
DANGER
To avoid serious injury or death:
•
Always operate attachment while seated with seat belt
•
Keep your head, arms, and legs inside the cab while
operating the power machine and attachment.
•
Never operate equipment from outside the cab.
•
Before leaving the operator’s seat, lower attachment to the
ground and shutdown the power machine.
•
Use the skid steer’s alternate emergency exit when exit
passage through the front is blocked.
•
Do not use hand or foot controls for handholds or steps.
•
Keep mud, snow, ice, and debris out of foot controls.
•
If included, raise restraint bar and move controls until both
are locked and interlock system is activated.
•
Inspect interlock control system regularly and perform
required maintenance to keep it operating properly.
•
Never bypass or modify a safety device.
Operating Checklist
Check
Ref.
Inspect skid steer safety equipment to make sure it
is in good working condition.
Skid Steer
Manual
Read and follow all safety information and decals.
Refer to “Important Safety Information”.
Page 1
Make sure all guards and shields are secured and in
good working condition.
Refer to “Important Safety Information”.
Page 1
Read and follow hook-up instructions.
Refer to “Skid Steer Hook-up”.
Read and make all required adjustments.
Refer to “Section 2: Adjustments”.
Read and follow all operating procedures.
Refer to “Section 3: Operating Procedures”.
Read and follow all maintenance Instructions.
Refer to “Section 5: Maintenance & Lubrication”.
Read and follow all lubrication instructions.
Refer to “Lubrication Points”.
Check tiller initially and periodically for loose bolts
and pins. Refer to “Torque Values Chart”.
!
DANGER
To avoid serious injury or death:
•
Keep yourself and all others away from rotating tines and
•
Never make contact with underground utilities such as
•
Keep attachment away from overhead electrical power
•
Clear area of debris before tilling. Mark any potential
•
Tine impact on objects can throw projectiles resulting in
•
Always stop hydraulics to tiller immediately after lifting
•
Prevent serious injury or death from rotating tines. Do not
•
Do not travel across inclines where the equipment could
•
Allow only persons to operate this attachment who have
•
Do not allow bystanders to be near the attachment, loader
arms, and power machine during operation.
Section 3: Operating Procedures
Содержание AP-SRT62
Страница 35: ......