Kubota AP-SRT62, Руководство оператора

Страница: 15 / 36

11
Section 2: Adjustments
AP-SRT62, & AP-SRT76 Rotary Tillers 321-095MK
Table of Contents
7/31/17
Tiller Depth
The tiller can be adjusted to five different positions,
3 depths (2", 4" & 5 1/2"), by rotating the skid steer hitch
plate forward or backward.
Definitions:
•
Standard Rotation: Operating the rotor turning in
the same direction as the skid steer wheels turn.
•
Reverse Rotation: Operating the rotor turning in
the opposite directions the skid steer wheels turn.
Full Depth Tilling, Tiller Rotated Level
Refer to Figure 2-1:
Retract or extend hydraulic cylinders at the front of the
skid steer loader arms until arrow on depth indicator
points to “FULL DEPTH” as shown in upper right corner
of illustration.
When using this depth setting, the tiller can be operated
in standard rotation or reverse rotation while traveling
forward or backing up.
4" Tilling Depth, Tiller Rotated Back
Refer to Figure 2-2:
From level position, retract hydraulic cylinders at the front
of the skid steer loader arms until arrow on depth
indicator points to the 4" mark above “FULL DEPTH” as
shown in upper right corner of illustration.
When using this depth setting, the tiller can be operated
in standard rotation or reverse rotation while traveling
forward or backing up.
4" Tilling Depth, Tiller Rotated Forward
Refer to Figure 2-3:
From level position, extend hydraulic cylinders at the front
of the skid steer loader arms until arrow on depth
indicator points to the 4" mark below “FULL DEPTH” as
shown in upper right corner of illustration.
When using this depth setting, the tiller can be operated
in standard rotation or reverse rotation while traveling
forward or backing up.
Tiller Rotated Level to Full Depth
Figure 2-1
Tiller Rotated Back to 4" Depth
Figure 2-2
Tiller Rotated Forward to 4" Depth
Figure 2-3
37812
37813
37814
Section 2: Adjustments