Multi-Purpose Rotor & Micro Rotor can be used
with this convenient model.
■
Rapid acceleration and deceleration
・
Only need 10 seconds to reach the maximum speed 15,000rpm
when AF-2018 (18 x 1.5/2mL tubes) is used.
・
Swinging bucket rotor SF-2504S can be used up to
4,800rpm/4,300xg.
Optional sealing caps and o-rings (code no. 055-0964)
for anti biohazard are applicable.
■
20 types of rotors are available for your
needs
■
Easy-to-use and convenient functions
・
Spin-down times from 1 up to 90 seconds can be memorized.
The flashing key enables to call up the memorized
spinning time.
・
Equipped with tachometer port to comply with GMP
requirements. Actual rotor speed is easy to check.
・
5 memory settings are available, which can save and recall
operation by pressing the button.
・
Acceleration and deceleration modes are available in three
steps.
Density gradient centrifugation also available.
・
RCF (xg) setting operation function and step centrifugal force
function can be applied.
・
Integrator function can optimize centrifugal effect.
G-sec value (integrated RCF value) can be measured and
the operation with this value is possible.
・
Timer can be set up to 990 seconds/minutes. During the hold
condition, elapsed running time is displayed.
■
Safety quality
Equipped with various sensors that stop operation
immediately for high safety if problem is detected.
Rotor sensor detects the rotor being installed.
■
The temperature of sample is maintained at
4˚C
Ambient temperature is 25˚C. Please see the table of rotors.
Optional foot switch
available for hands-free
lid opening
Micro Rotor
AF-2236
Rotor for Conical Tubes
AF-5004CH
50mL conical tubes are
available at 22,140xg.
Multi-purpose
Swinging Bucket Rotor
SF-5004
500mL bottles are
available at
4,000rpm/3,080xg.
Plate Rotor
PF-745S
Double stack Deep-well
plates can be used.
One-touch rotor mechanism makes
the rotors easy to be changed
