Model 6200
Maximum Speed
・
16,000 rpm
Maximum RCF
・
23,470 xg
Maximum Capacity
・
2,000 mL
Control system
・
Micro-processor control (brush-less motor)
Speed, RCF(g), Time, g · sec, Temperature, Acceleration and Deceleration, 5 memories
Alarm display
・
Lid open, Imbalance, Over speed, Rotor set state, Abnormally high temperature,
Detected electrical abnormality in motor, inverter, lid interlock, speed sensor and temperature sensor
Acceleration/Deceleration
・
Three selectable rates : Rapid, Slow and Super Slow
Speed setting/indication
・
10 or 100 rpm increments
RCF setting/indication
・
10 or 100 xg increments
Integrator setting and indication
・
Digital display, from 1.00 - 9.99 x 10
9
g · sec
Timer setting and indication
・
Digital display, with HOLD function (continuous operation) and flashing
1 second to 100 seconds, 1 sec increments
100 seconds to 990 seconds, 10 sec increments
1 minute to 100 minutes, 1 min increments
100 minutes to 990 minutes, 10 min increments
Temperature setting and indication
・
Digital display, -20˚C to +40˚C, 1˚C increments
Refrigerant
・
R134a
Power requirements
・
Single phase 50/60 Hz, 110V±10% 15A, 115V±10% 15A, 220V±10% 10A, 230V±10% 10A
Rated voltage and rated current
・
110V 7.9A, 115V 7.6A, 220V 3.9A, 230V 3.8A
Power consumption and heat output
・
720W 2.6 MJ/h
Dimensions, weight
・
50(W) x 65(D) x 85(H) cm
(
*
1)
, 118 kg
Certificates of conformity
・
IEC 61010-2-020 (except when using AF-5008C)
CE Marking (AC220V and 230V Version, except when using AF-5008C)
Specifications
(
*
1) Not including projections.
All specifications and external appearance are subject to be changed without notice.
* Use only rotors, adaptors and tube racks made by KUBOTA. Do not attempt to use rotors, adaptors or tube racks made by other manufacturers.
* Follow all instructions in the relevant Instruction & Service Manual when operating centrifuges.
Copyright © 2020 KUBOTA CORPORATION X-SEP, Printed in Japan
www.centrifuge.jp
29-9 Hongo 3-chome, Bunkyo-ku, Tokyo 113-0033, Japan
Tel +81 3 3815 1331 Fax +81 3 3814 2574
• The term of supplying spare parts for repair is 7 years after discontinuation of production (except spare parts which we are unable to procure).
• This catalogue is not for distribution in the USA, Canada and Mexico as products shown are not for sale in these countries.
To use the equipment safely, be sure to read
the instruction manual carefully before you start
operations.
Products in this catalogue are designed for use only by people who have the requisite technical knowledge, and must always be used
with considerable care and only for their intended purpose. People who do not have adequate technical knowledge or training should
only use the products under appropriate supervision by someone with expert knowledge, or else accidents are likely to occur.
IMPORTANT
If any of the cases listed at the left occurs,
immediately turn off the power, disconnect
the power cable plug or connecting
terminals from the main power outlet, place
a “Do not use” sign on the unit, and contact
the nearest branch of Kubota Corporation.
Do not misplace the instruction manual.
Keep the instruction manual nearby so that you can refer
to it whenever necessary.
• The rotor or buckets appear to be damaged or corroded.
• When the replacement period (years of operation, operating lifetime)
of a rotor has passed.
• The equipment emits a burning smell or becomes abnormally hot.
• You receive a weak electric shock when you touch the equipment with
your bare hands.
• When any other abnormality or indication of failure is noticed.
Safety
Precautions
Prohibited
Kubota has acquired ISO 9001 and ISO 13485 certification.
Precautions
for use
Please immediately
stop using
the products in any
of the cases listed
on the right.
KUBOTA CORPORATION
