Dok. Nr. R60744_Index 1a
Page 11 / 27
5.3.
„PROGRAMMING MODE“
The DIL‐switch positions of the safety unit are:
In this mode the parameters of the programming unit SMCB.1 or the parameters of the
safety unit can be editing by the touch panel.
If the programming unit is protected by a PIN‐Code, first of all enter the required PIN
(see chapter 5.7).
For use of the programming unit SMCB.1 enter the
„Master PIN“ or the „User PIN“ and confirm by OK.
If the PIN is lost, you can enter the emergency pin 6079.
5.3.1.
SMCB.1 Menu Structure
Please find the SMCB.1 Parameter List in the chapter 6
The first menu level serves for selection of
the parameters to be edited (SMCB.1 or
Safety Unit). To edit the SMCB.1, please
select “Display Unit”.
To edit parameters, please select
„Edit Data“ press OK to confirm.
See chapter 5.5
To save the parameters of the SMCB.1,
please select „Save Data To Display
Unit“ and press OK to confirm.
See chapter 5.6
For orientation, the actual menu from the first menu‐level appears in the top left
corner.
