ROTEX
®
SP "Non Sparking"
Operating/Assembly instructions
KTR-N
Sheet:
Edition:
40228 EN
26 of 28
6
Please observe protection
note ISO 16016.
Drawn:
2019-10-10 Pz/Bru
Replacing:
KTR-N dated 2017-01-02
Verified:
2019-10-10 Pz
Replaced by:
The ATEX marking of the ROTEX
®
coupling is applied on the outer sheath or on the front side.
The flexible spider resp. DZ element is not marked.
For the complete marking refer to the operating/assembly instructions and/or the delivery note/package.
The following marking applies for the products:
•
Hubs resp. spacer
without aluminium
Category 2 (hubs resp. clamping hubs with feather keyway)
ROTEX
®
<Year>
I M2 Ex h I
Mb
II 2G Ex h IIC T6
… T4
Gb
II 2D Ex h IIIC T80 °C
… T110 °C Db
-
30 °C ≤ T
a
≤ +60 °C … +90 °C
KTR Systems GmbH, Carl-Zeiss-Straße 25, D-48432 Rheine
•
Hubs resp. spacer
without aluminium
Category 3 (hubs resp. clamping hubs without feather keyway)
ROTEX
®
<Year>
I M2 Ex h I
Mb
II 3G Ex h IIC T6
… T4
Gc
II 3D Ex h IIIC T80 °C
… T110 °C Dc
-
30 °C ≤ T
a
≤ +60 °C … +90 °C
KTR Systems GmbH, Carl-Zeiss-Straße 25, D-48432 Rheine
•
Hubs resp. spacer
made of aluminium only
Category 2 (hubs resp. clamping hubs with feather keyway)
ROTEX
®
<Year>
II 2G Ex h IIC T6
… T4
Gb
II 2D Ex h IIIC T80 °C
… T110 °C Db
-
30 °C ≤ T
a
≤ +60 °C … +90 °C
KTR Systems GmbH, Carl-Zeiss-Straße 25, D-48432 Rheine
•
Hubs resp. spacer
made of aluminium only
Category 3 (hubs resp. clamping hubs without feather keyway)
ROTEX
®
<Year>
II 3G Ex h IIC T6
… T4
Gc
II 3D Ex h IIIC T80 °C
… T110 °C Dc
-
30 °C ≤ T
a
≤ +60 °C … +90 °C
KTR Systems GmbH, Carl-Zeiss-Straße 25, D-48432 Rheine
Short marking:
(A short marking is only made if not possible differently for reason of space or functioning.)
ROTEX
®
<Year>
10
Enclosure A
Advice and instructions regarding the use in
potentially explosive atmospheres
10.4
marking of coupling for potentially explosive atmospheres
