KTR-Group E4-DKM, Инструкция по эксплуатации и сборке

Страница: 2 / 28

ROTEX
®
SP "Non Sparking"
Operating/Assembly instructions
KTR-N
Sheet:
Edition: 40228 EN
2 of 28
6
Please observe protection
note ISO 16016.
Drawn: 2019-10-10 Pz/Bru Replacing: KTR-N dated 2017-01-02
Verified: 2019-10-10 Pz Replaced by:
ROTEX
®
SP „Non Sparking“
is part of the product line of torsionally flexible jaw couplings. Subject to
its design it is furthermore a shear type system providing for emergency operating features. Moreover,
ROTEX
®
SP „Non Sparking“
is a non-sparking/electrically conductive coupling system.
Type ZS-DKM-C (No. 085) is characterized by its ability for radial disassembly.
1 Technical data 3
2 Advice 9
2.1 General advice 9
2.2 Safety and advice symbols 9
2.3 General hazard warnings 9
2.4 Intended use 10
2.5 Coupling selection 10
2.6 Reference to EC Machinery Directive 2006/42/EC 10
3 Storage, transport and packaging 10
3.1 Storage 10
3.2 Transport and packaging 11
4 Assembly 11
4.1 Components of the couplings 11
4.2 Advice for finish bore 13
4.3 Assembly of the coupling (general) 14
4.4 Assembly of types GN, GND and EN 15
4.5 Assembly of type E4-DKM 15
4.6 Assembly of type ZS-DKM-C 16
4.7 Displacements - alignment of the couplings 17
5 Start-up 19
6 Breakdowns, causes and elimination 20
7 Disposal 21
8 Maintenance and service 22
9 Spares inventory, customer service addresses 22
10 Enclosure A
Advice and instructions regarding the use in potentially explosive atmospheres 22
10.1 Intended use in potentially explosive atmospheres 23
10.2 Inspection intervals for couplings in potentially explosive atmospheres 24
10.3 Standard values of wear 25
10.4 marking of coupling for potentially explosive atmospheres 26
10.5 EU Certificate of conformity 28
Table of contents