KTMED OXYPALM Скачать руководство пользователя страница 9

Страница: 9 / 27

SECTION 1 – Instruction

KTMED Inc. Model OXYPALM

Operator’s Manual 7

1-1 Function & Properties

OXYPALM, which KTMED Inc. makes, is a device to help monitor the changes in the physical state of a

patient by measuring the level of oxygen saturation in the blood or pulse rate with an oxygen sensor (light
sensor).

Once the sensor is connected to a patient, it works automatically and the result comes into sight at a

glance, enabling the patient to receive medical service conveniently.

OXYPALM needs no expertise to use. It is designed with the purpose that once the sensor is connected to

a patient, it works on its own, and that doctors and medical staff can analyze the result with ease.

OXYPALM stores 72hours of data and transfers the data to PC. There is PC software to analyze the data.

1-2 Applications

OXYPALM is indicated for use in measuring and displaying functional oxygen saturation and pulse rate for

neonate, pediatric and adult. OXYPALM is intended for spot-checking and continuous monitoring in hospital,
clinics, ambulatory, home and EMS (Emergency medical service) environment.

1-3 Composition

OXYPALM is composed of Main body (indicator and adjuster), sensor and other related peripherals. The

sensor includes two sources of light and one light detector.

[Figure 2]

Содержание OXYPALM




























Результаты поиска

Содержание OXYPALM

Отзывы:

Бренды по названию

Популярные бренды

KTMED OXYPALM, Руководство оператора

Результаты поиска

Содержание OXYPALM

Отзывы:

Бренды по названию

Популярные бренды