KTM Freeride E-SX, Руководство пользователя

Страница: 8 / 30

A red indicator lamp with the digit 1, 2, or 3 indicates the selected drive
mode.
Three drive modes are available. The drive modes define how the ve-
hicle will respond to operation of the throttle grip. The figures contain
approximate values for illustration purposes and do not show the actual
response.
Drive mode 1 is "Beginner".
The motor torque is reduced by 50%.
Drive mode 2 is "Enduro".
The further the throttle grip is opened, the more the motor power
is increased.
Drive mode 3 is "Cross".
The greatest increase in power occurs at the very outset, after
which the motor power increases more slowly.
3.5.4 Drive mode
The Map Select button
1
is only enabled when the vehicle is in standby
or ready mode.
- To change the drive mode, press the Map Select button
1
for at
least one second. The drive mode is activated when the button is
released.
If the throttle grip is fully closed and the vehicle speed is less than
5 km/h, the drive mode can also be changed while the vehicle is being
operated.
7
Possible states
• The selected drive mode lights up:
The vehicle is ready to operate and delivers full power.
• The selected drive mode flashes slowly:
High temperature ; the system is still fully operational.
- Adjust your riding style.
Low temperature ; the system delivers 80% of power under 8 °C
and 50% of power under 0 °C. After the KTM PowerPack
has warmed up sufficiently, either full power or 80% of power will
be available after a restart, depending on the temperature.
• All three drive mode indicators light up, blink code 22, 23, or 24:
Warning that the system has exceeded the maximum operating
temperature. To protect the system against damage, power has
been reduced considerably.
- If possible, park the vehicle and let it cool down. The vehicle does
not return to full power until the affected component has cooled
down and the vehicle is restarted.
• All three drive mode indicators light up, blink code 41:
A throttle grip fault has been detected. The system goes into
emergency mode and delivers 50% of power.
3.5.5 Drive mode/power reduction
3 CONTROLS