KTM Freeride E-SX, Руководство пользователя

Страница: 10 / 30

- Select the drive mode using the Map Select button
5
, see
Section 3.5.4.
- Press the start button
4
.
The vehicle is ready to operate and responds to turning of the throttle
grip.
- First familiarize yourself with the new riding and handling behavior of the electric motorcycle.
- Turn the throttle grip carefully. The absence of engine noise belies the actual power of the electric motorcycle.
Activation:
-
Press the main switch
3
into position .
Info
The vehicle must be at a standstill during the starting procedure as the
self-test of the vehicle electronics cannot be performed while the vehicle
is rolling.
The vehicle is in standby.
- Set and adjust the controls.
- Wear protective clothing.
- Remove the vehicle from the side stand.
- Secure the side stand using the rubber strap
2
.
- Mount the vehicle.
4.1 Starting procedure
4.2 Starting off
9
Preparations:
-
Install the KTM PowerPack, see Section 5.1.3.
- Check the protection cap of the charging socket
1
and the seal.
Do not start up the vehicle if the protection cap of the charging
socket is damaged or is not mounted.
4 RIDING INSTRUCTIONS