KTM Freeride E-SX, Руководство пользователя

Страница: 15 / 30

5.1.3 Installing the KTM PowerPack
Note
Material damage
Water and dirt damage or destroy components.
Before installing the KTM PowerPack, check the discharging plug on the motor and the discharging socket on the
KTM PowerPack for cleanliness.
Check the sealing lips on the discharging plug and discharging socket.
If the connectors are soiled, clean them carefully without using water or compressed air.
Spray the sealing lips of the discharging connectors with silicone spray.
- Remove the cover cap
1
.
- Check the discharging plug
2
on the motor and the discharging
socket
3
on the KTM PowerPack for cleanliness.
- Check the sealing lips of the discharging plug and discharging
socket and exchange them if necessary.
- If the discharging plug and discharging socket are soiled, clean
them and spray silicone spray on the sealing lips.
- Position the KTM PowerPack in the vehicle.
- Tighten screws
4
.
Guideline
- Fold down the seat and lock it.
KTM PowerPack fixation M6 10 Nm
14
5 ELECTRICAL SYSTEM